Building inspections are absolutely important. Whether the property is new or not, inspection cannot be overlooked. When building a property in Melbourne or anywhere else in Australia, you will quickly come to know that building inspections are a requisite for ascertaining that the construction process meets the quality and safety standards as set by the government. However, building inspections are a whole lot more complicated than that. They involve a ton of work. House inspections Melbourne will help ensure that you receive the best inspection.
Multiple tasks have to be carried out to determine that the construction project is up to the mark. There is also a need to effectively coordinate everything with the team members and contractors. This post takes a close look the 7 rules for building inspections. It provides an in-depth look into building inspections so that you can gain a better grasp of the process.
What Is Building Inspection?
Before we cover the rules for building inspections, it is important to know what building inspection is. In the simplest of words, it is a contractual duty that ensures that the work done by contractor meets the requirements in terms of materials used and procedures followed. Everything has to also comply with the specifications and the overall plan. The inspection aims to pick out any errors that might have occurred. Once the inspection is completed, the building inspector would provide the contractor with an inspection report which would act as evidence that a proper test had been conducted for upholding the integrity of the property. Here is why building inspections are absolutely necessary.
- Provide Protection against Deficiencies in Work: One of the main reasons why everyone requires building inspection is because it provides protection against deficiencies in work. You need to make sure that the equipment and installation materials used comply with the approved drawings, specifications, contract documents, and design plans. Thus, you gain assurance regarding the materials used by the contractor and the quality of work.
- Identify Hazards: Another reason why building inspections are important is because they help identify hazards before they occur. Safety should always be on the top of your mind. You simply cannot compromise on safety which is why you require an inspection company such as Independent building inspections to help you out.
- Enhancement of Construction Quality: Companies aim to provide the best quality. By hiring a building inspection service, you let contractors know just how important the quality of the construction is to you. Thus, they would work extra hard to provide you with the best construction quality.
Rules for Building Inspections
- Ensure Tops and Bottoms of Doors Are In Order
The first thing that the building inspection team would do is make sure that the tops and bottoms of the doors are in perfect order. The doors of the property might look fine. However, inspection is needed to properly check the top and bottom. It is common for painters to neglect these parts and not coat them altogether. To ensure that the bottom of the doors has been painted, the inspection team will check out the doors.
- Check the Staircase
Next, the inspection team would proceed by checking the staircase to prevent injuries. The thing about stairs is that they can easily become a danger or hazard in the property. Falling and slipping on the stairs can prove dangerous as it could cause various injuries. Therefore, you have to ensure that the building inspector checks the stairs to prevent slips.
- Check the Toilet Doors for Lift-Off Hinges
After the above, the inspection team would also have to see if there are any lift-off hinges on the toilet doors. There are specific requirements for bathrooms which mean that the property needs to have lift-off hinges for complying with safety requirements. It is uncommon for most Australians to know about this. However, the inspector would look into the matter.
- Tap on the Entire Property
A rule that building inspections have to follow is tapping on the entire property. It is a common way for inspectors to get to know about the exact structure of the property. There is always a possibility that the walls could have termites or other pests. Besides this, moisture build-up is also a problem and leak detection companies in San Clemente should be contacted. The inspection team must tap to see visible signs of a problem.
- Use Moisture-Sensing Technology
Keeping in view of the above, the building inspection team also needs to use moisture-sensing technology for assessing the moisture build-up in the property. It is the best way to get an accurate assessment of the situation. The team would first look for any wet areas in the building such as the kitchen and bathroom and use the device to check for any excess moisture.
- Check under the Paint
The building inspection team has a responsibility to make sure that you are not fooled by a fresh paint job. It is common for previous owners to cover something up with fresh paint. Since paint conceals defects caused by water, you will need the professionals to check under the paint. There could be shoddy workmanship, termite damage, or water damage. Hence, the inspectors will look at much more than just the property’s appearance. They will look for evidence involving hidden problems.
- Check Accessibility
Finally, the inspection team has to check for accessibility. It is one of the most important things that buyers have to consider. The inspectors will assess the accessibility of each and every part of the property. They would check the outdoor structures such as the garage, the foundation, and attic along with the interior like the flooring. Accessibility is something that should not be overlooked as it plays a huge role in making the most of the property.
Conclusion
Once you have finished reading the post, you will know the 7 rules for building inspections. It is important that you consider these rules the next time you get a property inspected. You never know what may lie under the renovation.